The February 2019 Communicator

Hot off the presses... 

This month an in-depth look at the new digital mode FT8, plus Amateur Radio News from the South West corner of Canada and elsewhere. You will find Amateur Radio related articles, profiles, news, tips and how-to's. You can download it as a .PDF file directly from https://goo.gl/MoLwKS

https://goo.gl/MoLwKS

As always, thank you to our contributors, and your feedback is always welcome.  My deadline for the next edition is February 20th. If you have news or events from your Vancouver area club or photos, stories, projects or other items of interest from elsewhere, please email them to the communicator@ve7sar.net

Keep visiting our site for regular updates and news: https://ve7sar.blogspot.ca    

~ 73,
  John VE7TI
  Communicator Editor

BC QSO Party 2019

As far as history goes, the British Columbia QSO Party—originally, the BC QSO Challenge—hasn’t got a long one. It began with a suggestion by Scott Robbins, VE7CCY in 2005 to members of the Delta Amateur Radio Society for a casual event that would promote on-air activity in BC. 

The objective was for VE7/VA7 stations to work anyone in the 36 federal electoral districts of BC, as well as the other Canadian provinces, US states and DX countries, and for stations outside BC to work only VE7/VA7 stations. While the rules have been tweaked a bit over the years, the objective has remained the same. 

We hope to hear you on the air!

http://www.orcadxcc.org/bcqp.html

The "Best" Random Wire Antenna Lengths

Random wire lengths you should and should not use

A Communicator Reprise: February 2014

Jack Clarke, VE3EED - SK

A random wire is exactly that—a piece of wire that’s as long as you can possibly make it. One end of the wire attaches to a tree, pole or other support, preferably at a high point. The other end connects to the random-wire connector on a suitable antenna tuner. You apply a little RF and adjust the antenna tuner to achieve the lowest SWR. That’s about all there is to it. 

Random-wire antennas seem incredibly simple, don’t they? The only catch is that your antenna tuner may not be able to find a match on every band. The shorter the wire, the fewer bands you’ll be able to use. And did you notice that the random wire connects directly to your antenna tuner? That’s right. You’re bringing the radiating portion of the antenna right into the room with you. If you’re running in the neighborhood of 100W, you could find that your surroundings have become rather hot—RF hot, that is! We’re talking about painful “bites” from the metallic portions of your radio, perhaps even a burning sensation when you come in contact with the rig or anything attached to it.

The random wire antenna is probably one of the least expensive, easiest and cheapest HF antennas to use if you have a tuner and you want to get the "most" out of a length of "random" wire without having to pull out that calculator, doing the math, getting the center insulator built or bought, running the feedline, and all the rest that goes with putting up a more elaborate antenna. All you need for a random wire antenna is some wire, your tuner, one or more supports up as high as you can get them to string the wire from the supports to the tuner, at least one or two insulators and a little time.
One single wire, no solder connections, very simple… all the way from the tuner to the end support. That's it in a nutshell… or is it?

Many hams have tried till they are blue in the face to install the random wire antenna that works on most; if not all of the HF bands with terrible results.
SWR usually is all over the place and the tuner will just not do it's job. You can get good loading and low SWR on sometimes 2 or 3 bands, but one or more of the bands that you want, just will not cooperate with an SWR that can be adjusted with the "tuner".

So after much frustration, down it comes and you go on to a totally different type of antenna… all that time just wasted in your opinion… until now!

We recently found some good information about random wire lengths that you should and should not use.

Jack, VE3EED, hopefully has solved a major headache we all have when we attempt to go thru the trial and error and frustration with getting the random wire to work where WE want it to work.

He knew that in order for the tuner to "see" a fairly low SWR to work within it's range, that the antenna had to be NOT A HALF WAVE ON ANY FREQUENCY that we wanted to use, because a half wave will give us a very high impedance and the resulting high SWR into a 50 ohm transmitter!

So Jack took most of one day, did the math with the aid of his trusty calculator, several cups of coffee and came up with, in Jack's own words…  "Here's the word on random-wire antennae."

Presented for your consideration by Jack, VE3EED, the table (next page) represents half wave lengths and multiples that you  DO NOT WANT TO USE!

You have to stay away from a half wavelength on any frequency. Therefore, we came up with the following numbers to avoid (IN FEET):

These lengths in the table are the culprits that cause all of the trouble when using random lengths.

So those are the numbers above that we have to stay as far away from as possible when building a long-wire antenna. Here they are in order: 16 19 22 26 32 33 38 44 46 48 52 64 65 66 76 78 80 88 92 95 96 99 104 110 112 114 123 128 130 132 133 138 144 152 154 156 160 165 171 176 182 184 190 192 195 198 208 209 220 224 228 230 231 234 240 242 246 247 256 260 264 266 272 276 285 286 288 297 304 308 312 320 322 323 325 330 336 338 342 352 361 363 364 366 368 369 374 380 384 390 396 399 400 414 416 418 429 432 437 440 442 448 455 456 460 462 464 468 475 480 484 494 495 496.

Some of these numbers are too close to squeeze in between them. Here are the final numbers (in my opinion) in green below that would be good for a long-wire antenna: (You may want to make a note of them)

29  35.5  41  58  71  84  107  119  148  203  347  407  423

REVISION NOTE:  James, KB5YN, points out that one of the so-called GOOD numbers was 220 feet. That is the 10th multiple of a half wave on 15 meters. His radio didn't tune up very well on 15 meters. So, having nothing better to do one day, I re-did the calculations going out to 500 feet. That meant calculating all the way to 32 multiples of a half wave on 10 meters. I won't bore you with all that so the first portion of this still only shows up to the 4th multiple. There are so many new frequencies to stay away from, that it gets pretty tricky for the longer wires. However, the list has been revised and is good for wires as long as 500 feet.

Mike AB3AP wrote a small C program that does just what Jack did, but used the band edges.  Because he’s more visually oriented, he then plotted the many overlapping "red zones" and ended up with the page at:

http://udel.edu/~mm/ham/randomWire/

He plotted the results for the U.S. CW band edges for use with his  4 band Elecraft K1 QRP rig.

You will note that when comparing Mike’s results with VE3EED that some of the results are a bit different.

YAK ! Yet Another Knot...

Knots are used frequently in our hobby. From securing loads to securing antennas, a knowledge of some basic knots is very valuable. In this series we feature some common knots for you to practice. This month… 

The Constrictor Knot 

Use this knot to bind ropes, as clamps, or as cable ties

The constrictor knot is appropriate for situations where secure temporary or semi-permanent binding is needed. Made with string or twine it is especially effective, as the binding force is concentrated over a smaller area. When tying over soft material such as the neck of a bag, hard stiff cord is more effective. When tying over hard surfaces, soft stretchy line is preferred. The constrictor knot's severe bite (which makes it so effective) can damage or disfigure items it is tied around.  To exert extreme tension on the knot without injuring the hands, one can fashion handles using marline spike hitches made around two rods.

Constrictor knots can be used for temporarily binding the fibres of a rope (or strand ends) together while splicing, or when cutting to length and before properly whipping the ends. Constrictor knots can also be quite effective as improvised hose clamps or cable ties. 

Noted master-rigger Brian Toss says of the constrictor: "To know the knot is to constantly find uses for it.

The Arduino

VE7ZD's Presentation 

At our January meeting, Kevin McQuiggin VE7ZD spoke about the Arduino and the many interesting possibilities for Amateurs to use this low-cost board.
Kevin's presentation is included here. A Saturday workshop is being planned to work on an Arduino project, most likely a TNC for messaging.

Click HERE for a link to the presentation

Our Next Basic Amateur Radio Course

Register Now... We Start Tuesday, January 15

The Surrey Amateur Radio Club generally offers two Basic licensing courses per year. Last year we graduated 27 members who attended our classes. These new 'Hams' came from all walks of life, some with technical backgrounds, most without. Many were interested in emergency preparedness and staying in touch if the BIG one hits.

We have set the start for the next class as Tuesday, January 15th at 6:30pm. We use the excellent classroom facilities courtesy of the Surrey Fire Service at their training facility 14901 64th Avenue, Surrey, BC.

Have a look at what Amateur Radio can offer:

An exciting modern hobby

A useful emergency communications skill

Click on the poster for more information

SARC's 2018 in Pictures

 We've Been Busy!

19/01